View TLP598GA_4110025.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP598GA
TOSHIBA Photocoupler Photo Relay
TLP598GA
Telecommunication Data Acquisition Measurement Instrumentation
Unit in mm
The TOSHIBA TLP598GA consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOS FET in a six lead plastic DIP package (DIP6). The TLP598GA is a bi-directional switch which can replace mechanical relays in many applications.
* * * *
Peak off-state voltage: 400 V (min.) On-state current: 150 mA (max.) (A connection) On-state resistance: 12 (max.) (A connection) Isolation voltage: 2500 Vrms (min.) (A connection) TOSHIBA Weight: 0.4 g 11-7A8
Pin Configuration (top view)
1 2 3 6 5 4
1. : ANODE 2. : CATHODE 3. : NC 4. : DRAIN D1 5. : SOURCE 6. : DRAIN D2
Schematic
1 2 6 5 4
1
2007-10-01
TLP598GA
Absolute Maximum Ratings (Ta = 25C)
Characteristic Forward current Forward current derating (Ta 25C) LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature Off-state output terminal voltage A connection On-state RMS current Detector B connection C connection A connection On-state current derating (Ta 25C) Junction temperature Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min., R.H. 60%) (Note 2) B connection C connection Tj Tstg Topr Tsol BVS ION / C ION Symbol IF IF / C IFP VR Tj VOFF Rating 30 -0.3 1 5 125 400 150 200 300 -1.5 -2.0 -3.0 125 -55~125 -40~85 260 2500 C C C C Vrms mA / C mA Unit mA mA / C A V C V
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). (Note 2): Device considered a two-terminal device: Pins 1, 2 and 3 shorted together, and pins 4, 5 and 6 shorted together.
Recommended Operating Conditions
Characteristic Supply voltage Forward current On-state current (A connection) Operating temperature Symbol VDD IF ION Topr Min. -- 5 -- -20 Typ. -- 7.5 -- -- Max. 320 20 150 80 Unit V mA mA C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the device. Additionally, each item is an independent guideline respectively. In developing designs using this product, please confirm specified characteristics shown in this document.
Circuit Connections
1 2 3
6 5 4
LOAD AC or DC
1 2 3
6 5 4
LOAD DC
1 2 3
6 5 4
LOAD DC
A connection
B connection
C connection
2
2007-10-01
TLP598GA
Individual Electrical Characteristics (Ta = 25C)
Characteristic Forward voltage LED Reverse current Capacitance Detector Off-state current Capacitance Symbol VF IR CT IOFF COFF Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VOFF = 400 V V = 0, f = 1 MHz Min. 1.18 -- -- -- -- Typ. 1.33 -- 30 -- -- Max. 1.48 10 -- 1 -- Unit V A pF A pF
Coupled Electrical Characteristics (Ta = 25C)
Characteristic Trigger LED current A connection On-state resistance B connection C connection RON Symbol IFT Test Condition ION = 150 mA ION = 150 mA, IF = 5 mA ION = 200 mA, IF = 5 mA ION = 300 mA, IF = 5 mA Min. -- -- -- -- Typ. 1 8 4 2 Max. 3 12 6 3 Unit mA
Isolation Characteristics (Ta = 25C)
Characteristic Capacitance input to output Isolation resistance Symbol CS RS Test Condition VS = 0, f = 1 MHz VS = 500 V, R.H. 60% AC, 1 minute Isolation voltage BVS AC, 1 second (in oil) DC, 1 minute (in oil) Min. -- 5 x 10
10
Typ. 0.8 10
14
Max. -- -- -- -- --
Unit pF Vrms VDC
2500 -- --
-- 5000 5000
Switching Characteristics (Ta = 25C)
Characteristic Turn-on time Turn-off time Symbol tON tOFF Test Condition VDD = 20 V, RL = 200 IF = 5 mA Min. -- (Note 3) -- Typ. 0.3 0.2 Max. 1.0 1.0 Unit ms
(Note 3): Switching time test circuit
IF VDD 1 2 6 4 RL VOUT tON IF VOUT 10% tOFF 90%
3
2007-10-01
TLP598GA
IF - Ta
100 280 A, C connection
PC - Ta
Allowable MOS FET power dissipation PC (mW)
Allowable forward current IF (mA)
80
B 240 200 160 120 80 40 0 -20
connection
60
40
20
0 -20
0
20
40
60
80
100
Ambient temperature
Ta
(C)
0
20
40
60
80
100
120
Ambient temperature
Ta
(C)
IF - V F
100 350
ION (RMS) - Ta (mA)
C connection
50
Ta = 25C
(mA)
30
300 250 200 150 100 50 0 -20
IF
10 5 3
ION (RMS)
B
connection
Forward current
A connection
1 0.5 0.3
0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8
On-state current
0
20
40
60
80
100
120
Forward voltage
VF
(V)
Ambient temperature
Ta
(C)
IFP - DR
5000 3000 Pulse width100s Ta = 25C
(mA) IFP Pulse forward current
1000 500 300
100 50 30
10 3
- 10 3
3
- 10 2
3
- 10 1
3
100
Duty cycle ratio
DR
4
2007-10-01
TLP598GA
RESTRICTIONS ON PRODUCT USE
* The information contained herein is subject to change without notice.
20070701-EN
* TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break, cut, crush or dissolve chemically. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.
5
2007-10-01

▲Up To Search▲

Price & Availability of TLP598GA

	To Download TLP598GA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .